MZ electronic NAUTI 011-X Instructions D'utilisation page 20

Note
IF PROGRAMMING OPERATIONS ARE SUSPENDED FOR MORE THAN 60
SECONDS
PREVIOUSLY SET DATA.
Troubleshooting
FAULT
Though UP or DOWN
buttons are pressed, the
instrument doesn't
receive any signal from
the magnetic sensor for
more than 12 seconds.
NAUTI 011-X
THE INSTRUMENT
CAUSE
WILL AUTOMATICALLY
CORRECTIVE ACTION
Check the sensor electric connections.
Check if sensor operates properly. If not, replace it.
Check the position of sensor and magnet on gipsy
and their distance (3 mm).
Check the operation of electric installation or anchor
windlass.
- 20 -
English
RELOAD THE
Rev. 07 – 2012