MZ electronic NAUTI 011-X Instructions D'utilisation page 18

Setting up to count in metres
1
Press
2
Then the gipsy circumference
programmed in the factory (33 cm)
will be displayed.
3
Press
number on
reaching the value corresponding
to the length of chain on the gipsy.
Press
value by one unit (e.g. 32 cm).
4
On reaching the set value wait for
5 seconds. The words SET CM will
run across the display screen.
5 At this point the instrument will set
up to count chain deployment in
metres – in 0.5 m increments up to
99.5 metres and 1 m increments
up to 999 metres.
NAUTI 011-X
for three second.
to increase
the display
to decrease the set
the
until
- 18 -
English
Rev. 07 – 2012