Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting up to count in feet
1
Press
2
Press
3
Then the gipsy circumference
programmed in the factory (13")
will be displayed.
4
Press
number
on
reaching the value corresponding
to the length of chain on the gipsy.
Press
value by one unit (e.g. 12").
5
On reaching the set value wait for
5
seconds.
INCHES will run across the display
screen.
6
At this point the instrument will set
up to count chain deployment in
feet – in 1, 2 or 3 foot increments
depending on the size of the gipsy.
NAUTI 011-X
for three second.
.
to
increase
the
display
to decrease the set
The
words
the
until
SET
- 19 -
English
Rev. 07 – 2012
Publicité
Table des Matières
