M-system MFNTK 95 Série Mode D'emploi page 165

REFIT THE DOOR
Hold the door firmly (fig. 6.14).
1.
2. Insert the hinge tongues into the slots, making sure that the groove drops into place
as shown in the figure 6.15.
3. Open the door to its full extent.
4. Fully close the levers "A" on the left and right hinges, as shown in the figure 6.16.
5. Close the door and check that it is properly in place.
Fig. 6.14
Fig. 6.15
Fig. 6.16
A
165