Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AFTER CLEANING, REPLACE THE INNER GLASS PANE
When replacing the inner glass pane, make sure that:
•
you replace the pane correctly, as shown. The pane must be in the position described
below in order to fit into the door and to ensure that the appliance operates safely and
correctly.
•
you take extra care not to bump the edges of the glass against any object or surface.
•
you do not force the pane into place. If you are experiencing difficulties replacing the
pane, remove it and start the process again from the beginning. If this still does not
help, call Customer Care.
•
check that you are holding the pane the correct way. You should be able to read the
wording on it as it faces you.
•
Check that the gasket "A" is in place (fig. 6.12). If not, correctly place the gasket in the
top edge of the inner glass (in the centre).
1.
Insert the inner glass pane in the uppermost pair of grooves and push it slightly (arrow
1 in figure 6.12).
Gently lower into place (arrow 2 in figure 6.12).
2.
Fig. 6.12
2
2
1
1
A
163
Publicité
Table des Matières
