Chapter 4: Command Summary - Star SCP700 Série Guide D'utilisation

26

Chapter 4: Command Summary

Important!
Please access the following URL
http://www.star-micronics.co.jp/service/u_mans_e.htm
for the lastest revision of the manual.
This printer has two command modes: Star mode and ESC/POS mode.
The Star mode emulates thermal receipt printers such as the TSP200 series and
other previous models. The ESC/POS mode emulates the Epson TM-T85
receipt printer and the Epson TM-295 slip printer.
The Star mode commands are as follows.
Print Station Selection (Combo mode only)
Control codes
<ESC> "+" "A" 0
<ESC> "+" "A" <0>
<ESC> "+" "A" 3
<ESC> "+" "A" <3>
Character Selection
Control codes
<ESC> "R" n
<ESC> "/" "1"
<ESC> "/" <1>
<ESC> "/" "0"
<ESC> "/" <0>
<ESC> "b" n1 n2 n3 n4
d1 ... <RS>
<ESC> "M"
<ESC> "p"
<ESC> "P"
Hexadecimal codes Function
1B 2B 41 30
Select receipt printer
1B 2B 41 00
1B 2B 41 33
Select slip printer
1B 2B 41 03
Hexadecimal codes Function
1B 52 n Select international character set
1B 2F 31
Select slash zero
1B 2F 01
1B 2F 30
Select normal zero
1B 2F 00
1B 62 n1 n2 n3 n4
Select bar code printing
d1 ... 1E
Select 12-dot pitch printing
1B 4D
Select 7 × 9 (half dot) font
1B 70 Select 14-dot pitch printing
Select 15-dot pitch printing
1B 50
Select 5 × 9 (2 pulses = 1 dot) font
Receipt Slip
printer printer
Receipt Slip
printer printer