GE IM-6 Manuel D'utilisation Et D'installation page 51

Kit im-6 ce kit convient à la plupart des modèles appelant uk-kit-1, uk-kit-2, uk-kit-4, et à tous les modèles appelant kit im-1, im-2, im-3, im-4 ou im5ss. si vous remplacez une machine à glaçons par un kit im-1 ou im-2, reportez-vous à la page 5.
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

POWER CORD ADAPTER
4
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end of the power cord
adapter (20) onto the male terminals on the icemaker
power cord. When connecting the adapter to the
power cord, make sure the seal is in place between
the connectors. Secure the power cord adapter to
the icemaker by putting it into the hook at the back
of the icemaker and attaching it to the icemaker with
a wire tie (22).
Hook
5
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted)(18) into
the icemaker as shown.
6
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints onto each side of
the plug. Make sure the restraints click into place.
Installation Instructions
20
Seal
Wire tie
Hook
18
MOUNT THE ICEMAKER
7
• Lift the icemaker so the fill tube(16) fits in the
fill cup opening (E). Hang the icemaker on the
two mounting screws (C).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube (16) extends into the fill cup
opening on the back of the icemaker. (Check
the rear of the refrigerator to make sure the
fill tube has not been pushed out of the back
of the refrigerator).
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
8
INSTALL THE ICE BUCKET
Put the ice bucket (11) under the icemaker.
Make sure the icemaker power switch is set to O (off).
9
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
10
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
51
16
C
E
11

Publicité

Table des Matières
loading

Table des Matières