GE IM-6 Manuel D'utilisation Et D'installation page 27

INSTALL THE ICEMAKER FILL CUP
5
Install the icemaker fill cup (side-mounted) (18)
into the icemaker as shown.
6
REMOVE PLUG COVER
Remove the electric plug cover
from the side wall of the freezer
compartment. Insert a standard
screwdriver blade into the slot in
the cover and twist the screwdriver,
opening the slot. The cover will
pop off. Discard this cover.
7 POWER CORD ADAPTER
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end of the power cord
adapter (19) onto the male terminals on the icemaker
power cord. When connecting the adapter to the
power cord, make sure the seal is in place between
the connectors. Secure the power cord adapter to
the icemaker by putting it into the hook at the back
of the icemaker and attaching it to the icemaker
with a wire tie (22).
Hook
PLUG IN THE ICEMAKER
8
Place the icemaker on its
side as shown. Insert the
icemaker power cord plug
(A) into the socket on the
side wall, making sure the
prongs and holes are
matched. Press the plug
firmly into the socket.
Installation Instructions
18
Seal
Wire tie
Hook
A
MOUNT THE ICEMAKER
9
• Lift the icemaker so the fill tube extension (10)
fits in the fill cup opening (C). Hang the
icemaker on the two mounting screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension (10) is still in the fill cup
opening. (Check the rear of the refrigerator to
make sure the fill tube has not been pushed out
of the back of the refrigerator.)
• The icemaker mounting screws are located in
the uppermost position of the mounting slots.
• Make sure the icemaker power switch is set
to O (off).
THEN TIGHTEN THE ICEMAKER MOUNTING
SCREWS SECURELY.
10 INSTALL THE ICE BUCKET
Place the ice bucket that came with your
refrigerator in the lowest position on the left side
of the freezer compartment.
11 ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
12
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
27
10
A
C