Repairs; Environmental Protection; Technical Specifications - Metabo PE 12-175 Mode D'emploi

PE 12-175_ v5 Über.ENG
ENGLISH

13 Repairs

Repairs to electrical tools must be
carried out by qualified electricians
ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.

14 Environmental Protection

Metabo's packaging can be 100% recycled. Worn
out power tools and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.

15 Technical Specifications

Explanation of details on page 2. Subject to
changes serving technical progress.
D = maximum support plate diameter
max
n = No-load speed
0
n = Speed at rated load
N
P = Nominal power input
1
P = Power output
2
M = maximum torque
max
T = Spindle thread
m = Weight (without mains cable)
a = Typical estimated acceleration in the
hw
hand/arm area
Typical A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K = Measurement uncertaincy
Wear ear muffs!
Values measured according to EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
10
18.12.2007 11:25 Uhr Seite 10