Available Accessories; Repairs - Metabo DH 330 Instructions D'utilisation Originales

Moisture contents of work piece too
high.
− Dry work piece.
Planed surface cracked
Planer knives blunt.
− Install sharp knives.
Planer knives blocked by chips.
− Remove chips.
Work piece was planed against the
grain.
− Plane work piece in opposite direc-
tion.
Too much material removed in one pass.
− Make several passes at less depth
of cut.
Worked surface uneven:
Planer knives are installed uneven.
− Adjust planer knives with setting
gauge.
Feed rate too little
Resin built-up on bearing surfaces of
centre table, infeed table or outfeed
table.
− Clean bearing surfaces and apply a
light coat of sliding wax.
Work piece jammed
Too much material removed in one pass.
− Make several passes at less depth
of cut.

10. Available Accessories

For special tasks the following accesso-
ries are available at your specialized
dealer – see back cover for illustrations:
A
Work Stand
For a secure machine stand and
optimal working height;
folding, ideal for mobile use.
B
Dust Extraction Connector
To connect to a dust collector
C
Three Roller Support
To support long work pieces
ENGLISH
D
Planer Knives
For planing wood
E
WAXILIT Anti-seize Compound
Sliding wax to improve stock gliding
quality on the planing beds.
F
Care and Maintenance Spray
Removes resin residue and pre-
serves metal surfaces

11. Repairs

A
Danger!
Repairs to power tools must only be
carried out by qualified electricians!
Electric tools in need of repair can be
sent to the service centre of your coun-
try. Refer to the spare parts list for the
address.
Please attach a description of the fault to
the machine.
25