Care And Maintenance; Available Accessories; Repairs; Environmental Protection - Metabo SR 1500 Set Instructions D'utilisation Originales

ENGLISH
 Reversing lever fully to the right: 
reverse
3. Set torque only with the reversing
lever in forward position:
 Reversing lever fully to the left =
maximum torque.
 Reversing lever one step to the
right = torque is reduced.
 Adjust working pressure at the
compressor (see Technical spec-
ifications for max. permissible
working pressure).
4. Connect quick coupler to the air
supply.
5. Pull trigger to start.

5. Care and maintenance

Danger! 
A
Always disconnect from air
supply before servicing. 
Repair and maintenance work other
than described in this section must

9. Technical specifications

Model
Air consumption
Max. permissible working pres-
sure
Speed
Square drive
Maximum bolt size
Impact mechanism
Maximum torque
Minimum hose size (inner)
Vibration (effective value of
weighted acceleration)
Uncertainty K
EN ISO 15744
Sound power level L
WA
Sound pressure level L
PA
Uncertainty K
Dimensions: 
length x width x height
Weight
8
only be carried out by qualified spe-
cialists.

Check all screwed connections for
tightness, tighten if necessary.

If the tool is not lubricated by a serv-
ice unit or line lubricator, add 3-5
drops pneumatic oil to the air inlet
every 15 minutes of use (constant
operation).

Do not store tool unprotected out-
doors or in damp environment.

6. Available accessories


Pneumatic oil 0.5 litre
Special lubricant for air tools, serv-
ice units and line oilers. 
Stock-no. 090 100 8540
 Line oiler R3/8" female 
For fitting directly to air tools. Oil
level can
through sight glass. 
Stock-no. 090 105 4592
SR 1500 Set
l/min 360
bar 6.3
-1
min 7500
" 1/2
M16
rotary
hammer
Nm 360
Nm 10
2
m/s < 2.5
2
m/s 1.23
dB (A) 107.8
dB (A) 96.8
dB (A) 4
mm 195x70x195
kg 2.0
always be checked
SR 2700 SR 2900
400 400
6.2 6.2
7000 7500
1/2 1/2
M16 M16
jumbo ham- twin hammer
mer
610 670
10 10
2.89 4.52
1.45 2.26
108 99
97 88
4 4
195x70x195 195x70x195
2.5 2.5

7. Repairs

Danger! 
A
Repairs to air tools must be
carried out by qualified specialist
ONLY!
Air tools in need of repair can be send to
the service centre in your country. See
spare parts list for address.
Please attach a description of the fault to
the power tool.

8. Environmental protection

The tool's packaging can be 100 % recy-
cled.
Worn out machines and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
SR 3500
600
6.3
5500
3/4
M32
twin hammer twin hammer
1490
13
3.24
1.62
108.9
97.9
4
230x97x240 230x97x240
5.7
SR 4500
600
6.3
5500
1
M32
1490
13
6.71
2.68
102
91
4
5.8