Functional Description; Carton Contents; Unpacking And Cleaning - Delta 31-260X Manuel D'utilisation

Table des Matières

Les langues disponibles

FOREWORD

The Delta Model 31-260X is an 18" (457 mm) x 36" (914 mm) drum sander with a two-speed drum. Its single-piece frame and

cast-iron table construction provides accuracy, stability, and easy adjustments. This unit can be fitted with an optional outboard

shaft that accommodates an accessory pneumatic drum for contour sanding. The 31-260X will provide accurate sanding for

wood up to 18" (457 mm) in one pass or 36" (914 mm) in two passes.

NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are

representative only and may not depict the actual labeling or accessories included. These are intended to illustrate

technique only.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

CAUTION TAG

Pay close attention to caution tags attached to this machine and follow these instructions precisely.

This machine is heavy. Remove the container from around the machine. DO NOT lift it from the

container. Carefully unpack all loose items from the shipping container and cut the carton from around the machine.

Drum Sander

Stand Parts

a. Side Wall (2)

b. Back Bracket

c. Front Bracket

d. Legs (2)

E. End Cap

F. Leveling Foot with jam nut (4)

M8 Flat Washers (4)

M8-20 Hex-Head Bolt (4)

M8 Flange Nut (16)

M8 x 20 Carriage Bolt (16)

5/16 -18 Flange Nuts (4)

5/16" Lock-washers (4)

5/16-18 x 1" (25 mm) Socket Head Bolts (4)

10. 1/8" T-Handle Hex Wrench

11. 10-32 x .75 (19 mm) Indicator Bolt

12. #10 Flat Washer

13. SA Indicator

14. Elevation Handwheel