Replace Nameplate; Installation And Connection; Transport The Appliance - Salvis ProfiLine PLGGH Mode D'emploi

9.5

Replace nameplate

10.

Installation and connection

● Please observe the local kitchen regulations.
● Installation work must be carried out in accordance with the manufacturer's assembly instructions
and in accordance with accepted technical regulations.
● Let Customer Service install the appliances and provide instruction.
● Observe the safety instructions from page 28 Chapter 2.
10.1

Transport the appliance

● Note the weight of the appliance.
. Transport the appliance using suitable transport equipment or lift truck.
Label, types of gas
‒ in the device
‒ in the base unit
● After changing the type of gas, the changed
type of gas must be documented on the
device.
● When the nozzle sets are delivered, a blank
label is included to identify the types of gas.
. Indicate the type of gas used on the label.
. Degrease the old label before bonding.
. Bond the new label with the actual
identification onto the old label.
en
41 / 72