Cleaning And Care; Instructions; Cleaning The Motor Base; Cleaning The Blender Jug And Blade Assembly - Smeg BLF01 Manuel D'utilisation

4 Cleaning and care

4.1 Instructions

Improper use
Danger of electrocution
• Unplug the blender before cleaning it.
• Do not immerse the motor base in water
or other liquids.
Improper use
Risk of damage to surfaces
• Do not use steam jets to clean the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on parts
with metallic finishes (e.g. anodised,
nickel- or chrome-plated).
• Do not use abrasive or corrosive
detergents (e.g. powder products, stain
removers and metallic scourers).
• Do not use rough or abrasive materials
or sharp metal scrapers.

4.2 Cleaning the motor base

To keep the blender's motor base outside
surfaces in good condition, they should be
cleaned regularly after use. Use a damp
and soft cloth with mild detergent.
68
Cleaning and care
4.3 Cleaning the blender jug and
Clean the appliance following the
instructions in section "3.2 How to remove
the blade assembly".
• Never touch the blades with your hands.
• Remove the blade assembly only using the

4.4 Using the Self-clean option

The blender jug and blade assembly can
be cleaned using the Self-clean option:
1. Fill the jug with warm water and mild
2. Turn the control knob to the setting 1.
3. Press the START button.
4. Press the PULSE button for 2 seconds at
5. Remove the jug, empty and rinse it.
6. Dry thoroughly.

4.5 Cleaning other blender parts

The blender lid and measuring cup can be
washed in warm soapy water or in the
dishwasher.
Make sure they have dried completely
before fitting them back on the blender.
blade assembly
Sharp blades
Danger of cuts
measuring cup.
detergent.
a time. Repeat the operation about 10
times.