Smeg BLF01 Manuel D'utilisation page 54

For this appliance
• Avoid touching moving parts. Keep
hands, hair and clothing, and utensils
away from the blades during operation,
to prevent personal injury and/or
damage to the appliance.
• Care shall be taken when handling and
emptying the jug and during cleaning.
• Always disconnect the blender from the
supply if it is left unattended and before
assembly, disassembly or cleaning.
Unplug the blender when it is not being
used, before cleaning it and if you notice
any fault. Let the appliance cool down
before cleaning.
• Always use the blender with the lid in
place.
• Check that the lid is correctly closed
before turning on the blender.
• Do not overfill the blender (max. 1.5 litres).
• Do not use the blender with parts or
accessories of other manufacturers.
• Only use original spare parts. The use of
spare parts not approved by the
manufacturer could lead to fires, electric
shocks or personal injury.
• Only place the blender on level and dry
surfaces.
• Do not run the blender empty.
54
Instructions
• Do not use the blender as a storage
compartment. Keep it empty before and
after use.
• Let liquids cool down to room
temperature before placing them in the
blender.
• Avoid touching moving parts, such as the
blade assembly.
• To avoid the risk of cuts, and damage to
the blender, do not put your hands or
tools like cutlery, etc. into the blender jug
while it is operating. You can use a wood
or plastic spatula only when the blender
is off.
• Do not use harsh detergents or sharp
objects to wash or remove residues from
the blender jug.