Checking The Ladder And Pack Contents; Mounting The Support Foot - Batavia Giraffe Air BT-TL009 Mode D'emploi

Échelle télescopique
Masquer les pouces Voir aussi pour Giraffe Air BT-TL009:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

− Always wear tightly fitting cloth-
ing when you climb onto the lad-
der. Loose-fitting clothing could
get caught and cause you to fall
off the ladder.
− Do not extend the ladder in a
makeshift manner and do not
modify its shape and function in
any manner.
− The ladder must never be placed
in a new position from above.
Checking the ladder and
pack contents
WARNING!
Risk of injury!
If you use a damaged ladder or
employ the ladder incorrectly, there
is a large risk of injury.
− After delivery and before first
use, check the condition of the
ladder and that all parts are
functional.
WARNING!
Danger of suffocation!
If children play with the packaging
wrapper, they could catch them-
selves in it and suffocate.
− Do not let children play with the
packaging wrapper.
NOTICE!
Risk of damage!
The ladder can be damaged if you
incautiously open the packaging
7062759-Telescopic_Ladder-3.91m-Ma-1710-06.indb 23
with a sharp knife or another
pointed object.
− Proceed carefully when opening.
1. Take the ladder out of the
packaging.
2. Check to make sure that the
delivery is complete (see fig. A).
3. Check whether the ladder or the
individual parts exhibit damages.
If this is the case, do not use the
ladder. Contact the manufacturer
at the service address specified
on the warranty card.

Mounting the support foot

CAUTION!
Injury to persons and damage
to property!
The ladder can fall over during the
assembly of the support foot. In the
process, it can lead to damage to
property or injury to persons.
− Take care during the assembly of
the support foot that the ladder
does not fall over.
− If necessary, get assistance from
a second person for assembly.
1. Place the support foot
ground (see fig. H).
2. Put the beams
6
foot in such a way that the
mounting holes of the beams and
support foot align.
3. Put the hexagon bolts
the mounting holes.
4. Fasten the bolts with the nuts.
English
on the
2
on the support
through
9
23
20-03-18 16:23
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7062759

Table des Matières