At The End Of The Programme; Stand-By Function; Hints And Tips; Preparing The Laundry - FUST Novamatic TW 748 E Notice D'utilisation

Sèche-linge
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

65
You can delay the start of a
programme from a minimum
of 60 minutes to a maximum
of 20 hours.
3. Press the Départ/Pause (Start/Pause)
touchpad.
The display shows the countdown of the
delay start.
When the countdown is completed, the
programme starts.
Change a programme
1. Press the on/off button to deactivate
appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.

At the end of the programme

When the programme is completed:
• An intermittent acoustic signal operates.
• The indicator
• The indicators
Bac plein (Tank) comes on.
• The Départ/Pause (Start/Pause)
indicator is on.
The appliance continues to operate with the
crease guard phase for approximately other
30 minutes.
The crease guard phase removes creases
from your laundry.

HINTS AND TIPS

Preparing the laundry

• Close the zippers.
• Close the fasteners of the duvet covers.
• Do not keep ties or ribbons loose (e.g.
apron ribbons). Tie them before you start
a programme.
• Remove all items from the pockets.
• If an item has the internal layer made of
cotton, turn it inside out. Make sure that
the cotton layer is always external
• We recommend that you set the correct
programme applicable for the type of
fabrics that are in the appliance.
flashes.
Filtre (Filter) and
You can remove the laundry before the
crease guard phase is completed. We
recommend, for better results, that you
remove the laundry when the phase is
almost completed or completed.
When the crease guard phase is
completed:
• The indicator
• The indicators
Bac plein (Tank) comes on.
• Départ/Pause (Start/Pause) indicator
goes off.
1. Press the on/off button to deactivate
the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter and
empty the water container when
a programme is completed.

Stand-by function

To decrease the energy consumption, this
function automatically deactivates the
appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the
programme.
• Do not put fabrics with strong colours
together with fabrics with light colours.
Strong colours can bleed.
• Use an applicable programme for cotton
jersey and knitwear to prevent the items
to shrink.
• Make sure that the laundry weight is not
more than the maximum weight that is in
the programme table.
• Dry only the laundry that is applicable for
tumble dryer. Refer to the fabric label on
the items.
is on but does not flash.
Filtre (Filter) and

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières