Specifications; Basic Instructions; Intended Use; Not Permitted - Prolux Sprinter 90 Notice D'utilisation

Original manual – Self-loading dolly „Sprinter 90 / 900"

Specifications

Sprinter 90
Material:
Weight [kg]:
Measurements L x W x H [mm]:
Sprinter 90 wheel diameter [mm]:
Permitted wheel diameter [inch]:
Permitted wheel width [mm]:
Technically permissible load capacity [kg]:
Technically permissible speed [km/h]:
Sprinter 900
Material:
Weight [kg]:
Measurements L x W x H [mm]:
Sprinter 900 wheel diameter [mm]:
Permitted wheel diameter [inch]:
Permitted wheel width [mm]:
Technically permissible load capacity [kg]:
Technically permissible speed [km/h]:

Basic instructions

It is urgently necessary to make sure you have read the original manual and that all
information and instructions have been taken into account thoroughly before the first
application. The user has to keep the manual close at hand as long as the product is
not shut down. All data refers to new products.
In case that you remove, change, or make any structural alterations to the protection device,
all liabi lity on the part of the manufacturer is extinguished.
This manual corresponds to the state of the delivery of the product. ProLux Systemtechnik GmbH & Co. KG cannot
be made liable for any incorrect statements and damages of the product occuring due to non-compliance with the
manual.

Intended use

The self-loading dollies „Sprinter 90 and 900" are intended for the use as a towing tool for vehicles and trailers.
The dolly consists of 2 halves, which are pulled together by means of a drawbar drive. The actuators grip under-
neath the car wheel and lift it off the road. Now, the lifted vehicle can be towed without the wheel turning.
Warning:
The self-loading dollies „Sprinter 90 & 900" are solely intended for the use of towing
vehicles and trailers. Any use beyond the scope of the intended purpose shall be
deemed as not in conformity with the intended purpose!

Not permitted

- The dollies do not have any brakes and are therefore not to be used on uneven surfaces or slopes without the
additional support of a towing vehicle.
- The dollies are not to be used while the engine is running and the vehicle may under no
circumstances be driven with mounted dollies.
- The model-specific indication of the permitted wheel size is not to be exceeded.
steel, galvanised
22,5
800 x 455 x 215
160
13 to 24
325
650
60
steel, galvanised
27
800 x 455 x 215
160
15 to 24
325
950
60
13