Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
Only nails shown in the Table below can be driven with this Nailer.
NOTE: Use only genuine Hitachi nails to assure nail quality and driving ease.
Wire-collated coil nails
Sheet-collated coil nails
ACCESSORIES
Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
This manual downloaded from http://www.manualowl.com
Min.
(5.3 mm)
(2.3 mm)
WARNING
1
1 Eye protector
2 Allen wrench for M6 screw
3 Allen wrench for M5 screw
4 Allen wrench for M4 screw
5 Nose cap "No-mar push lever
attachment" (It is attached in the
magazine assembly)
— 8 —
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
10 - 1/2" × 11 - 13/16" × 5 - 1/16"
(266 mm × 300 mm × 128 mm)
4.6 lbs (2.1 kg)
200 – 300 nails (1 coil)
.049 ft
3
/cycle at 100 psi
(1.4 ltr/cycle at 6.9 bar)
(1.4 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
.209"
.090"
3
2
4
5
1
1
1
1
1
2
)
2
)
Max.
.252"
(6.4 mm)
.099"
(2.5 mm)
Publicité
Table des Matières
