Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
STAPLE SELECTION
Only staples shown in the Table below can be driven with
this Stapler.
Dimensions of staples
16 Gauge
Min.
.057"
.917"
(1.45mm)
(23.3mm)
ACCESSORIES
WARNING
Accessories other than those shown below can
lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1
1 Safety glasses
2 Allen wrench for M5 screw
1" Crown
Max.
2
1
1
— 8 —
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14-3/8" × 9-13/16" × 3-11/32"
(365 mm × 250 mm × 85 mm)
4.7 lbs. (2.1 kg)
150 Staples
.037 ft
3
/cycle at 100 psi
(1.05 ltr/cycle at 6.9 bar)
(1.05 ltr/cycle at 7 kgf/cm
3/8" NPT Thread
OPTIONAL ACCESSORIES
Sequential Trip Mechanism Kit (Code No. 876762)
(Single Shot Parts)
Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.
APPLICATIONS
Insulation sheathing.
Wire lathing.
BEFORE OPERATION
Read section titled "SAFETY" (pages 4 – 6).
Make sure of the following before operation.
WORKING ENVIRONMENT
WARNING
No flammable gas, liquid or other flammable
objects at worksite.
Clear the area of children or unauthorized
personnel.
AIR SUPPLY
DANGER
2
)
2
)
... sold separately
(Code No.877153)
(Code No.874042)
(Code No.876212)
NEVER use oxygen or
other bottled gases.
Explosion may occur.
Publicité
Table des Matières
