Pelgrim GVW840KOR Notice D'utilisation page 36

Adjustment of the water-softener
The dishwashing machine is equipped with a
device which can be adjusted to the degree of
hardness of the tap water. After having opened
the door, you will find the device located in the
upper right-hand corner, and it can be adjusted
with the aid of a coin (see fig. 4). Depending on
the model, it is possible to adjust it to one of
either 3 or 5 settings. Before adjusting the
water-softener, please consult the tables
below and set the number of the chosen level
(1, 2, ...) to the reference symbol.
Model with 3 settings
water hardness settings
German French
degrees degrees
0 - 9°dH 0 - 15°dF setting 1
(no salt)
10 - 17°dH 16 - 30°dF setting 1
18 - 29°dH 31 - 50°dF setting 2
30 - 40°dH 51- 70°dF setting 3
Model with 5 settings
water hardness
German French
degrees degrees
0 - 9°dH 0 - 15°dF setting 1
(no salt)
10 - 15°dH 0 - 25°dF setting 1
16 - 23°dH 26 - 40°dF setting 2
24 - 34°dH 41- 60°dF setting 3
35 - 46 °dH 61- 80°dF setting 4
47 - 58 °dH 81-100°dF setting 5
Contact the Water Company to make enquiries
about the hardness of the mains water.
Rinse-aid
A
fig. 4
Open the rinsing agent reservoir (see fig. 5)
on the inside of the door, next to the
detergent reservoir.
The means of operation will depend on the
type of dishwasher: the containers all work
on the basis of the same principle.
Unscrew the lid of the rinse-aid reservoir in
an anti-clockwise direction.
settings
B
C
fig. 5