Configuring The Trigger - Abus TVIP52500 Manuel Utilisateur

English
„Enable this event": Activate in order to use the event.
„Priority": Events with a higher priority are executed first.
„Detect next event after": Dwell time between events (e.g. motion detection)

13.1 Configuring the trigger

„Video motion detection": Activate the desired motion detection window.
„Periodically": The event will be periodically triggered every other minute. The maximum value is 999
minutes.
„Digital input": Here you can trigger the event by an external digital input or sensor.
„System boot": Event is triggered at camera start-up (after losing power).
„Recording notify": Event is triggered after recording disc is fill or starting to rewrite old data.
„Camera tempering detection": Event is triggered if camera tapering detection is recognized.
Event schedule
92