Privacy Masking; Sensor Settings - Abus TVIP52500 Manuel Utilisateur

9.2 Privacy masking

Up to 5 different areas for privacy
masking can be set up on the screen.
You first need to activate the function
by selecting „Enable privacy mask".
By pressing „NEW" a new window is
created and the size can be adjusted.
Press „Save" in order apply the
changes.
This function is only compatible with browsers, which support ActiveX element (like Microsoft
Internet Explorer). Furthermore this function should not be used when operating a PTZ network
camera or ePTZ.
<URL> http://< network camera >/setup/privacy.html
< network camera > is the IP-address or hostname of the network camera.

9.3 Sensor settings

Here you can change different settings
regarding the CMOS sensor of the
network camera.
„Maximum Exposure Time": The shorter
the exposure time is set the less light hits
the sensor and the darker the image gets.
The sharpness during fast movements
decreases the longer the exposure time is
set.
„Exposure level": Here you can set the
default aperture. The higher the value the
brighter the video image.
„Max. gain": With this setting it is possible to show more details during low light conditions In dark rooms a
better performance can be achieved.
„Enable BLC": Backlight compensation (BLC) improves the display of objects in front of different light
conditions.
Usage of Sensor profiles:
The network camera supports different sensor profiles, depending on situation or time. Next to the standard
profile following can be configured:
•
Day:
•
Night:
•
Schedule:
Use this profile if the network camera is installed at a location with permanent
daylight conditions.
Use this profile if the network camera is installed at a location with permanent low
light conditions.
Here you can select a schedule. The settings will only be active within this
timeframe.
85
English