Installing The Wall Bracket - Abus TVAC70200 Mode D'emploi

1. Scope of delivery

1 camera wall bracket

1 joint component

1 housing bottom case

1 housing top case

1 sun shield

1 installation set

1 set of installation instructions
2. Installing the weatherproof housing
The weatherproof housing should be installed in the
following order. When installing the cables, they
should be 1.5 metres long, from the wall opening.
Only trained staff or your specialist
installation contractor should install the
housing.

2.1. Installing the wall bracket

2.1.1. Use the bracket as a drilling template
2.1.2. Drill the holes for the fixing screws.
2.1.3. First run the cables through the bracket
2.1.4. Now fix the bracket to the wall or ceiling
and mark the corresponding three drill
holes on the wall or ceiling.
and use cable ties to relieve the tension
on the cables.
using the screws.
8