Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

"Sun" - "Sat": Here you can select the weekdays the event shall be active.
„Always": Here you can activate the event for the complete day (24 hours)
„From...to": Here you can activate the event for certain hours.
Action
Here you can configure the action which shall be performed after the event has been triggered.
„Trigger digital output for": The digital output of the camera is switched.
„Server": A defined Medium is sent to the entered server (e.g. an email with a snapshot is sent to the server).
Server configuration
You can set up to 5 servers. By pressing „add" you can configure a new server. The server „SD" is predefined
and describes the SD card slot as target for data storage. Following further server types are available:
E-Mail: Enter here the access data of the email account.
FTP: Enter here the access data of the FTP account. Address convention: ftp.abus-sc.com
HTTP: Enter here access data for HTTP. Adress convention: http://abus-sc.com/cgi-bin/upload.cgi
Network storage: Adress convention:
After entering data all settings have to be saved. Use click "Test" to test whether the setting is correct. The
testing result will be shown in a pop-up window.
13.2

Media Settings

Up to 5 different media settings can stored in the network camera.
\\192.160.0.5\NAS
93
English

Publicité

Table des Matières
loading

Table des Matières