Troubleshooting
8.4
Moving the appliance
➤ Remove the contents.
➤ Tape down all the shelves.
➤ Turn the adjustable feet right back so that they are not damaged when moving.
➤ Tape the door closed.
➤ Only carry the appliance in an upright position.
Avoid tipping the appliance.
Protect the exterior of the appliance with a blanket or something similar.
9
Troubleshooting
If you are unable to solve a problem yourself, get in touch with customer services (see
address list overleaf).
Fault
Appliance does not work The appliance is not connected
The appliance is not cold
enough
24
Possible cause
to a power supply
The appliance is switched off
Circuit breaker or fuse has blown Switch on the circuit breaker;
Temperature is not set properly
The ambient temperature could
require a higher temperature set-
ting
Door was opened frequently
Door was not closed properly
Door is not hermetically sealed
D15, D50, D52
Remedy
Connect the appliance
Switch the appliance on
switch on or replace the fuse
Check the set temperature
Set a higher temperature
Do not open the door more
often than necessary
Close door properly
Check the door seal and
clean or replace
EN