Using The Kneading Blade Assembly; Using The Blender Assembly; Cleaning & Maintenance; Cleaning The Food Processor - Brandt ROB506BG Manuel D'instruction

Masquer les pouces Voir aussi pour ROB506BG:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

d) Using the kneading blade assembly
Assembly
- Insert the bowl as when working as a chopper.
- Place the disc stem (4). Then, put the kneading blade assembly (12) on the drive shaft.
- Put on lid (3) and engage in position.
Operation
- Rotate the switch to "ON" position,
- Put the food to be processed in feeding tube on lid (3). Insert pusher (6) in feeding tube. Using the
pusher, push the food slowly through the feeding tube and onto kneading blade.
- When you have finished preparing your food, remove the mains plug.
e) Using the blender assembly
Assembly
- Make sure the blade base is fixed tightly.
- Put blender jar onto motor base vertically, and then rotate the jar clockwise to fix it.
Operation
- Put the food to be processed into the jar (16).
- Install measuring cup and cover properly.
- Rotate the switch PULSE for pre-mixing.
- Rotate the switch to "ON" position,
- When you have finished preparing your food, remove the mains plug.
4) CLEANING & MAINTENANCE
a) Cleaning the food processor
To avoid any danger:
- Always disconnect the appliance from the mains before cleaning.
- Whenever possible, rinse parts immediately after processing for easy cleanup.
- Never immerse the motor unit in water or use caustic or abrasive cleaning materials clean only with
a damp cloth.
- Wipe the base, control knob, and feet with a damp cloth and dry thoroughly. Stubborn spots can be
removed by rubbing with a damp cloth and a mild, non-abrasive cleaner. Do not immerse the base in
liquid.
- Do not use rough scouring pads or cleansers on any plastic or metal parts.
- Do not fill the bowl with boiling water or place any of the parts of the appliance in boiling water
- Discoloration on the housing caused by carotene, for example, can be removed using cooking oil.
b) Storing the food processor
After cleaning the various parts, wipe gently with a clean cloth. Reassemble all parts and keep the
appliance in a dry place. Remember to clean all the parts after each use.
19

Publicité

Chapitres

Table des Matières
loading

Table des Matières