Snooze Function; Sleep Timer; Nap Timer; Dimmer - Magnasonic SelfSet MM176K Guide De L'utilisateur

Snooze Function

• When an alarm is sounding, press the
alarm for 9 minutes. Alarm will resume after 9 minutes.
• Pressing the button on the top of the unit will cancel the snooze
function; Snooze function will also stop automatically after 30 minutes.

Sleep Timer

The sleep timer allows you to listen to music for a preset amount of time
ranging from 90 minutes to 15 minutes. It is commonly used by people who
prefer to fall asleep to music.
1. Press the button to turn the radio on.
2. Press the button to toggle through the preset times:
90min > 60min > 30min > 15min > OFF
3. To cancel the sleep timer, press the
'OFF' in the display or press the

Nap Timer

The nap timer allows you to set a buzzer alarm to go off after a preset amount
of time ranging from 90 minutes to 10 minutes.
1. With radio off, press the
2. Press the button to toggle through the preset times;
90min > 80min > 70min > 60min > 50min > 40min > 30min > 20min >
10min > OFF
3. When enabled, pressing the
and pressing again will reset the timer to 90 minutes.
4. When the nap timer expires, it will continue to buzz for 30 minutes or it
can be stopped by pressing the
5. To cancel the nap timer, press the
the display.

Dimmer

You can adjust the brightness of the LED display making it brighter, dimmer or
even turning it off. There are three dimming options: High > Low > OFF.
1. With the radio off, press the
the dimmer settings.
button to stop the
button until you see
button.
button to turn on the nap timer.
button will show current nap timer
button.
button until you see 'OFF' in
button to toggle between
- 10 -

Temperature Settings

The temperature can be displayed in °C or °F.
1. With the radio off, press and hold the
or °F modes.

Listening to the Radio

1. Press the button on the top panel to turn the radio 'ON'.
2. Press and hold the button while the radio is ON to toggle between
AM and FM radio.
3. Press the or buttons once, to move back/move forward one station
at a time.
4. Press and hold the or
forward through the stations; the unit will automatically scan to the next
broadcasting station.
5. Control the radio volume with the
6. Press the button to turn the radio 'OFF'.
Please ensure that the FM antenna is completely unrolled and extended for
best FM reception. The AM band uses an internal directional aerial. For best
reception, please rotate the radio.
7.

To Set the Radio Presets

1. Press the button on the front panel to turn the radio 'ON'.
2. Press and hold the button while the radio is ON to toggle between
AM and FM radio.
3. Use the or buttons to select the desired radio station.
4. To set a radio present, press and hold the
will blink on the display e.g., 'P02'.
5. Use the or buttons to toggle to the desired preset number.
6. Press the button again to set the preset.
7. Repeat steps 2 through 6 to set more presets.
button to switch between °C
buttons for one second to scan back/
or buttons.
button. A preset number
- 11 -