Becker Centronic SensorControl SC431 Notice D'utilisation page 20

Operating Instructions
The following operating modes are possible:
Sunlight/Twilight/Broken glass
function activated
Sunlight/Twilight function
activated
Broken glass function deactivated
Twilight/Broken glass function
activated
Sunlight function deactivated
TEST Mode
This mode is used to test the SC431. In TEST mode, the times for the sunshade
function are reduced from minutes to seconds. Press the MAN/AUTO button
until the control light fl ashes green 3 times. The TEST mode will remain active
for 5 mins.
MAN/AUTO button
The MAN/AUTO button can be used to deactivate automatic control commands
(e.g. sun protection function, twilight function).
When the system is set to manual mode, the control will light up briefl y in red.
When the system is set to automatic mode, the control light will light up briefl y
in green.
20
All functions deactivated
Sunlight/Broken glass function
activated
Twilight function deactivated
Twilight function activated
Sunlight/Broken glass function
deactivated