Settings Menu Content - Salora 50XUS4404 Mode D'emploi

Settings Menu Content

Picture Menu Content
You can change the picture mode to suit your preference or requirements. Picture
Mode mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic
and Natural.
Contrast Adjusts the light and dark values on the screen.
Brightness
Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Energy Saving
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
Backlight
is set to Custom. Highlight and use Left/Right directional buttons to set.
Picture Zoom Sets the desired image size format.
This option may be available depending on the Picture Zoom setting. Highlight and
Picture Shift
press OK, then use directional buttons to shift the picture upwards or downwards.
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
Iris HDR
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
Advanced Settings
Dynamic
You can change the dynamic contrast ratio to desired value.
Contrast
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
Colour Temp
are available.
If the Colour Temp option is set as Custom, this setting will be available. Increase the
White Point
'warmth' or 'coolness' of the picture by pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
Iris Blue
make more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While Iris Dimming is active, it will
Iris Dimming
enhance contrast locally for each defined zone.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
Noise Reduction
the amount of noise.
Low, Medium, High and Off options are available. While Iris Contour is active, it will
Iris Contour
decrease the contour effects in low resolution contents and auto streaming services.
Films are recorded at a different number of frames per second to normal television
Film Mode
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as Off, the TV's
Gamut Mapping
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
While watching from a HDMI source, this feature will be visible. You can use this feature
HDMI Full Range
to enhance blackness in the picture.
Reset Resets the picture settings to factory default settings (except Game mode).
English - 15 -
PC Position
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu
while in PC mode.
Sound Menu Content
lable if the Energy Saving
Dolby Audio
Surround Sound
Sound Output
AVL (Automatic
Volume Limiting)
Advanced Settings
Network Menu Content
Network Type
Appears only when the input source is set to VGA/PC.
If the image is not centered in VGA mode use this option to automatically adjust the
Autoposition
position of the image. Press OK to start the auto adjustment.
H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot
Dot Clock
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the input source(computer etc.) you may see a hazy or noisy picture on
Phase
the screen. You can use phase to get a clearer picture by trial and error.
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than Off.
Surround sound mode can be changed as On or Off.
Sets the sound output preference. TV, S/PDIF and HDMI ARC options will be available.
There will be no sound output except through the selected option. If HDMI ARC option
is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as grayed out and will be
unavailable.
Sets the sound to obtain fixed output level between programmes.
If the Dolby Audio menu item is set to an option other than Off the AVL setting options
will change. Auto, Night, Normal and Off options will be available. In Auto mode the
TV will switch to Normal or Night mode automatically according to the current time
information. If no time information is available this option will always function as Normal.
When the TV switches to Night mode for the first time after setting this option as Auto,
an information bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Dynamic Bass Enables or disables the Dynamic Bass.
Sound Mode You can select a sound mode (If the viewed channel supports).
Sets digital out audio type. This option will not be available if the Sound Output option
Digital Out
is not set as S/PDIF.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
Headphone/ option as Headphone.
Lineout
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing.
Sets headphone volume. This option will not be available if the Headphone/Lineout
option is not set as Headphone.
Headphone
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Reset Resets some of the sound settings to factory defaults.
Disable the network connection or change the connection type.
English - 16 -