Interior Fittings; Special Features; Sticker "Ok; Switching Off And Disconnecting The Appliance - CONSTRUCTA CK64 Série Mode D'emploi

Masquer les pouces Voir aussi pour CK64 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Interior fittings

You can reposition the shelves inside
the appliance and the door shelves as
required:
Lift the glass shelves, pull forwards,
lower and swivel out to the side.
Fig. $
Reposition stoppers and re-insert
shelf. Fig. %
Lift the door shelf and remove. Fig. &

Special features

(not all models)
Pull-out container
Fig. '
The pull-out container is especially
suitable for the storage of foods which
contain meat. It can be taken out for
loading, unloading and cleaning.
Vegetable container with cover
Fig. (
The vegetable container can be taken
out for loading, unloading and cleaning.
Ice cube tray
Fig. )
1. Fill the ice cube tray ¾ full of drinking
water and place in the freezer
compartment.
2. If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
3. To loosen the ice cubes, twist the ice
tray slightly or hold briefly under
flowing water.

Sticker "OK"

(not all models)
The sticker "OK" lets you check whether
the refrigerator compartment achieves
the safe temperature ranges of +4 °C or
colder recommended for food. If the
sticker does not indicate "OK", gradually
reduce the temperature.
Note
When the appliance is switched on, it
may take up to 12 hours until the set
temperature is reached.
Correct setting
Switching off and
disconnecting the
appliance
Switching the appliance off
Turn temperature controller, Fig. "/A, to
position "0". Refrigeration unit and light
switch off.
Disconnecting the appliance
If you do not use the appliance
for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.
en
29

Publicité

Table des Matières
loading

Table des Matières