Connecting To Video Equipment - Sony CPJ-D500 Mode D'emploi

Connecting (continued)
Notes on connection
• Turn off the video
equipment and the
projector before
connecting.
• Refer to the video
equipment's manual
as well.
Tip
If S-Video and video
plugs are both
connected, the S-Video
signal is automatically
selected.
10
-EN
Connecting

Connecting to video equipment

Connect video equipment such as a VCR or video
camera recorder using an A/V connecting cable
(not supplied).
This unit accepts the video signals of both NTSC
and PAL color systems.
VIDEO
L
AUDIO
R
to AUDIO OUT
: Signal flow
If your video equipment has an S video jack
Connect the projector to the video equipment using
an S-Video cable (not supplied). You can enjoy high
quality pictures.
In this case you do not need to connect the video
(yellow) plug.
S VIDEO
to S-VIDEO OUT
VIDEO
L
AUDIO
R
to AUDIO OUT
: Signal flow
Front
to VIDEO OUT
to VIDEO IN
A/V connecting cable
(not supplied)
Front
S-Video cable
(not supplied)
to S-VIDEO
IN
Audio cable (not
supplied)
to
AUDIO
IN
to
AUDIO
IN