Maintenance; Changing The Filter - Sony CPJ-D500 Mode D'emploi

Maintenance

Tips
• You can use the same
filter sponge after
washing it.
Wash the filter
sponge with water or
a mild detergent
solution, and then
rinse it.
Make sure that the
filter sponge is
completely dry before
replacing it in the
unit.
• If the filter is
damaged, consult
your nearest Sony
dealer.
24
-EN Maintenance

Changing the filter

If the unit heats up because of a very dusty filter, the
unit displays "TEMPERATURE" and stops
operating.
1
Turn off the power and disconnect the power cord.
2
Remove the dusty filter sponge.
Insert your finger into the groove by the filter and
push out the filter from the unit . Remove the filter
sponge from the filter.
yyyy
3
Place a clean filter sponge into the filter, and
yyyy
replace the filter in the unit.
yyyy
Three filter sponges for replacement are supplied.