Sony CPJ-D500 Mode D'emploi page 20

Adjusting the picture of the RGB input (continued)
Tip
The adjustment for the
video signal is not
reset.
Note
The FUNCTION
RESET button is
purposed hard to press
so that adjustments are
not canceled by
mistake.
20
Adjusting the picture of the RGB input
-EN
Resetting the adjustment to the
factory preset level
Press FUNCTION RESET.
The adjustment for the current input signal is reset to
the factory preset level.
ON/STANDBY LAMP
POWER PC/VIDEO
FUNCTION
VOL
COUNT DOWN
FUNCTION RESET
SET START
FUNCTION RESET