Automatic Timer; Kitchen Timer; Stopwatch Function; Automatic Safety Cut-Out - NEFF T16BT 6 Série Mode D'emploi

Automatic safety cut-out

en
Within the next 10 seconds, set the desired cooking
3.
time with the twist knob.
The cooking time counts down. If you have set a
cooking time for several cooking positions, the shortest
cooking time will be displayed.
lights up. The display for the cooking position lights
x
up.
When the time has elapsed
When the cooking time has elapsed, the cooking
position switches off.
‹
display. An audible signal sounds.
minute in the timer display. The
Touch any control. The displays go out and the audible
signal ceases.
Changing or cancelling the cooking time
Select the hotplate using the twist knob. Touch the
symbol and change the cooking time or set to
Notes
If you want to query the remaining cooking time for a
■
particular hotplate, select the hotplate with the twist
knob. The cooking time appears for 10 seconds.
You can select a cooking time of up to 99 minutes.
■
If the cooking time has counted down to the last
■
minute, the timer display changes from minutes to
seconds.

Automatic timer

You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 39
Note: You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates:
Select the hotplate and touch the
the cooking time or set to

Kitchen timer

You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Setting the kitchen timer
Touch the U symbol. The display
1.
symbol flashes. min lights up in the timer display.
‹‹
38
above the
A ü x
lights up in the cooking position
flashes for one
‹‹
display flashes.
x
symbol. Change
x
in the settings range.
‹‹
A above the
Use the twist knob to set the desired cooking time.
2.
The timer starts counting down after a few seconds.
When the time has elapsed
When the time has elapsed, an audible signal sounds
and
‹‹
display above the
symbol. The displays go out and the audible signal
ceases.
Setting the correct time
Touch the
the time.

Stopwatch function

symbol
The stopwatch function displays the time that has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
symbol.
œ
starts. Seconds are displayed during the first minute,
and then minutes.
The stopwatch function is switched off by touching the
symbol again. The timer display goes out.
œ
x
Note: If another time-setting option is selected in
‹‹ .
addition to the stopwatch function, the setting appears
in the timer display for 10 seconds. The stopwatch
function is then displayed again.
bAutomatic safety cut-out
I f a hotplate has been switched on for a long time
A u t o m a t i c s a f e t y c u t - o u t
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
U
flashes in the display for one minute. The
symbol lights up. Touch any
U
U symbol and use the twist knob to change
appears in the timer display and timing
‹‹
"‰
A
and the / residual
• œ