Automatic Shutdown Function - RedMax BHT250PD60 Manuel D'utilisation

To connect the battery to the product
WARNING: Only use Redmax original
BLi200ZR battery in the product.
1. Slide the battery into the battery holder of the
product. The battery must slide easily, if not, it is not
installed correctly. The battery will lock into position
when you hear a click.
2. Make sure that the battery is installed correctly.
To start the product
1. Press and hold the start/stop button until the green
LED is lit.
2. Press the power trigger lockout on the front handle
up.
10
3. Press the power trigger up to apply full throttle.
To activate the SavE function
The product is equipped with a battery saving function
called SavE.
1. Press the SavE button to activate the function. A
green LED will come on to indicate that the function
is active.

Automatic shutdown function

The product is equipped with a shutdown function that
deactivates the product if it is not used. The green LED
light for start/stop indication will go out and the product
shuts down after 45 seconds.
To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Press the start/stop button until the green LED is out.
3. Press the release buttons on the battery and pull the
battery out.
To adjust the handle
437 - 002 - 02.01.2018