Safety Instructions For Operation; General Safety Instructions - RedMax BHT250PD60 Manuel D'utilisation

Hedge trimmer safety warnings - Personal
safety
• Use both hands when operating the hedgetrimmer.
Using one hand could cause loss of control and
result in serious personal injury.
• Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material to
be cut when blades are moving. Make sure the
switch is off when clearing jammed material. Blades
coast after turn off.A moment of inattention while
operating the hedge trimmer may result in serious
personal injury.
• Carry the hedge trimmer by the handle with the
cutter blade stopped.Proper handling of the hedge
trimmer will reduce possible personal injury from the
cutter blades.
• Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring or its own cord.Cutter blades contacting
a "live" wire may make exposed metal parts of the
power tool " live" and could give the operator an
electric shock.
• DANGER -Keep hands away from blade. Contact
with blade will result in serious personal injury.
• Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.

General safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others.
• Do not use the product if it is changed from its initial
specification. Do not change a part of the product
without approval from the manufacturer. Only use
parts that are approved by the manufacturer. Injury
or death is a possible result of incorrect
maintenance.
• Do a check of the product before use. See,
devices on the product on page 7 and
Maintenance on page 11 . Do not use a defective
product. Do the safety checks, maintenance and
service instructions described in this manual.
• Children should be supervised to ensure that they do
not play with the product. Never allow children or
other persons not trained in the use of the product
and/or the battery to use or service it.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
Note: Local laws can regulate the age of the operator.
437 - 002 - 02.01.2018

Safety instructions for operation

• If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop. Avoid all
usage which you consider to be beyond your
capability.
• Never use the product if you are fatigued, while
under the influence of alcohol or drugs, medication
or anything that could affect your vision, alertness,
coordination or judgment.
• Never use the product in bad weather, for instance in
fog, in rain, strong winds, intense cold, etc.
Extremely hot weather may cause overheating of the
product.
• Faulty blades can increase the risk of accidents.
• Do not allow children to use or be in the vicinity of
the product. Since the product is easy to start,
children may be able to start it if they are not kept
under full surveillance. This can mean a risk of
serious personal injury. Disconnect the battery when
the product is not under close supervision.
• Ensure that no people or animals come closer than
15 metres while you work. When several operators
are working in the same area the safety distance
should be at least 15 metres. Otherwise there is a
risk of serious personal injury. Stop the product
immediately if anyone approaches. Never swing the
product around without first checking behind you to
make sure that no one is within the safety zone.
• Ensure that people, animals or other things can not
affect your control of the product or that they do not
come in contact with the cutting attachment or loose
objects that are thrown out by the cutting
attachment. However, do not use the product unless
you are able to call for help in the event of an
accident.
• Always inspect the working area. Remove all loose
objects such as stones, broken glass, nails, steel
wire, string, etc., that could be thrown out or become
wrapped around the cutting attachment.
Safety
• Make sure that you can move and stand safely.
Check the area around you for possible obstacles
(roots, rocks, branches, ditches, etcetera) in case
you have to move suddenly. Take great care when
you work on sloping ground.
• Keep a good balance and a firm foothold at all times.
Do not overreach.
• Deactivate the product before you move to another
area. Attach the transport guard when the product is
not in use.
• Never put the product down unless you have
deactivated it and removed the battery. Do not leave
the product unsupervised when it is switched on.
WARNING: Read the warning instructions
that follow before you use the product.
5