Volume Adjustment; Aux In Operation; Bluetooth Operation - Trevi XR 9A5 Manuel Utilisateur

2. The Red LED will illuminate during charging, when it has completed, the Red LED will
turn off.
Note: There will be a beep when the battery is low and needs to be recharged.
OPERATION
Powering ON:
Press and Hold ON/OFF button(6) for 2 seconds to power ON, the Blue LED will start to flash.
If an Aux (3.5mm) cable is connected to the unit, the Blue LED will turn off, and the Green LED
will stay illuminated,notifying you the uint is in Aux-In mode.
Powering OFF:
Press and Hold

Volume adjustment

Press the (1) Volume - button or the

AUX IN OPERATION

Plug in the supplied 3.5mm cable into the unit. The other end is connected to your device.
The Green LED will only illuminate when in "Aux" mode.
Please note music and volume can be controlled by your device.

BLUETOOTH OPERATION

Pairing
1. Place the speaker near the Bluetooth device to be paired;
2. Turn on the speaker the unit will automatically switch to "Pairing mode" when it will be
turned on;
3. Follow the instructions of your device to search for the speaker;
4. Search for and pair the speaker named "XR 9A5" and enter the PIN "0000" if required;
5. Once paired, you will hear an audible confirmation tone and you will be able to play the
music tracks.
Note:
- The Bluetooth speaker works only with one connection at a time, the connection can not
be interrupted during normal operation.
- When Bluetooth pairing with external devices fails, delete another one Bluetooth device in
the connection list, restart the Bluetooth speaker and look again for the signal.
Begin streaming Music
- Press (7) button to start playing music;
- Press and Hold for 2 seconds
- Press and Hold for 2 seconds
- Press either (5) button or
ON/OFF button(6) for 2 seconds to power OFF.
(1) button to play the previous track;
(1) button for volume control.
(5) Volume + button repeatedly to adjust the volume.
(5) button to play the next track;