SOLIS FT14MI Mode D'emploi page 28

TH E FU NCT IO N B U T TO N S
s
O N YO UR A P P L IA N C E
TIMER
GB
ON /OFF button
ON/OFF
Use this button to switch your appliance on and off.
SP EE D butt on
SPEED
Use this button to adjust the ventilation speed. When you connect the power plug
and switch the appliance on with the ON/OFF button, the appliance is set to the
standard LOW speed. Press the SPEED button to change the speed to MED (medium).
Press the speed button another time and the speed changes to HI (high). If you press
the speed button a third time, the speed changes back to LOW. The respective set-
ting is indicated by a red LED light in the display.
Natural
Nat ural / SLEE P but ton
SLEEP
(n at ur al w ind and sle ep m ode)
With this button, you can activate the functions "Natural Wind" and "Sleep mode".
Press the button once to switch to "Natural Wind" mode, meaning the red LED light
next to "SOFT" lights up. The wind is rising and subsiding. Press the button twice to
switch to "Sleep mode", the wind is also rising and subsiding, but even softer. The
red LED light next to "SLEEP" lights up.
54 54
Natural
SLEEP
SPEED
ION
OSC. ON/OFF
HI MED LOW
Additionally, you can adjust the ventilation speed in this function with the SPEED
button, so that the rising and subsiding wind is stronger or softer.
OFF SLEEP
TIM ER button
TIMER
You can adjust the appliance operating time by pressing the TIMER button.
Settings of 1 hour (1H), 2 hours (2H), 4 hours (4H) and 8 hours (8H) are possible. Each
press of the button increases the setting by one step, the current setting is indicated
by the red LED light that illuminates next to the selected time. After the set amount
of hours has elapsed, the appliance switches off automatically.
Press the TIMER button again to switch the timer function off. The LED next to the
operating time does not light up. The appliance is in permanent operation mode,
operating until you switch it off with the ON/OFF button.
1H 2H
I ON button
ION
You can additionally switch on the Ion function with the ION button. The blue LED
light next to ION lights up. In the Ion function, the air is enriched with negative ions,
increasing the air quality and well-being.
Pressing the ION button again switches the Ion function off, the LED goes out.
OSC button (O sc i ll ati on)
OSC.
You can adjust the oscillation function with this button. Press the button to make
the ventilator slowly move from left to light. Press the button again to stop the
oscillation.
SOFT
4H 8H OFF
GB
55 55