Dimplex MFP 100W Instructions De Montage Et De Service page 10

Installation and Operating Instructions
Design Convector Heater MFP100-200W
When a programming cassette is used check that the program
"ON" is active (also refer to the operating instructions of the
programming cassettes on the pages that follow).
If the fault cannot be corrected, please consult the nearest
after-sales service agent.
For processing the service call, the product number (E-
number) and the manufacturing date code (FD-number) of the
heater are required. These data can be found on the rating
plate.
Repairs to the appliance, or any other interventions, may only
be performed by a qualified electrician or the after-sales
service.
9. Customer Service, Spare Parts
Robert Bosch Hausgeräte GmbH
Deutschland
Auftragsannahme
Tel.- Nr. +49 (0) 1801 / 22 33 55
Fax.-Nr. +49 (0) 1801 / 33 53 07
Ersatzteibestellungen
Tel.- Nr. +49 (0) 1801 / 33 53 04
Fax.-Nr. +49 (0) 1801 / 33 53 08
Email: spareparts@bshg.com
Spare parts order via Internet: http://www.dimplex.de
10. Cleaning
Before cleaning make sure that the heater is disconnected
from the power supply and that it has cooled down. Wipe the
outside of the heater with a soft, damp cloth. Do not use any
abrasive products or furniture polish for cleaning as these may
damage the surface.
Dust that may have accumulated in the heater can be removed
from the outside with a vacuum cleaner.
11. Technical Data
Supply voltage 230V~, 50Hz
Thermostat 5-30°C
Protection class I PE conductor
Enclosure type IP X4 (splash-water protected)
12. Guarantee
This product is guaranteed for two years in accordance with our
guarantee terms..
13. Disposal
The appliance should not be disposed of with
household waste, but should be taken to your local
recycling centre.
Österreich
Auftragsannahme
Tel.- Nr. 0810 240 260
Fax.-Nr. (01) 60575 51212
Ersatzteibestellungen
Tel.- Nr. 0810 240 261
Fax.-Nr. (01) 60575 51212
hausgeraete.et@bshg.com
10
MFP100-200W_gb Ba 09/12/A