Cleaning; Storage; Troubleshooting; Technical Data - Proficook PC-MS 1032 Mode D'emploi

Cleaning

WARNING:
• Always pull the power supply plug before
cleaning.
• Allow the appliance to cool down.
• Never immerse the base in water for clean-
ing. It could result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive
items.
• Never use sharp or scouring cleaning materi-
als.
Base
Clean the base with a clean cloth from the outside,
without any additional cleaning agents.
Jug, lid and mixing attachments
• Always clean the jug, the lid and the mixing at-
tachment immediately after use.
• Remove the used mixing attachment from the
jug by pulling it upwards.
• Only rinse the parts by hand with a soft cloth
while adding a mild dishwashing detergent.
• You may remove ingrained dirt with a nylon
brush.
• Then rinse with clean water and dry off the
parts.
• Stow the mixing attachments in the compart-
ments on the underside of the base so that they
do not get lost.

Storage

• Clean the device as described and allow to dry
completely.
• We recommend that you keep the appliance in
the original packaging if the appliance will be
not used for long periods.
• Always keep the appliance out of the reach of
children in a dry, well ventilated place.

Troubleshooting

Malfunction Cause
Possible
The appli- Does the jug
ance does stand properly on
not work/the the base?
Is the appliance
motor does
switched on?
not turn
Is the mains
socket defective?
The milk Is frothing at-
doesnot tachment "2a"
foam properly attached
Is the attachment
blocked?
Is there too little
milk in the can?
The appli- The appliance
ance turns has not cooled
off before down.
the allotted
time during
repeated hot
stirring or
frothing

Technical Data

Model: ...................................................PC-MS 1032
Power supply: ............................230 - 240 V~, 50 Hz
Power consumption: .............................. 600 - 650 W
Protection class: .......................................................Ι
Net weight: ....................................... approx. 1.08 kg
The right to make technical and design modifica-
tions in the course of continuous product develop-
ment remains reserved.
This device complies with all current CE directives,
such as electromagnetic compatibility and low volt-
age directive and is manufactured according to the
latest safety regulations.
Remedy
Check if the jug
is properly placed
on the base.
Try a different
socket.
Check the attach-
ment.
There should be
between 75 and
225 ml in the
can.
Leave the ap-
pliance to cool
down for
2 minutes.
You may shorten
this time by rins-
ing the jug with
cold water.
33