•
System cards: enrolment, reset and 2 user cards
•
Cable
3/ OPERATION WITH THE CARDS:
Providing rights of access
1. Hold the enrolment card against the antenna.
2. An ORANGE indicator lights for 15 seconds.
You then have 15 seconds to enrol your card. Up to 100 cards can be enrolled.
The user swipes the user card to register it. The antenna sounds 3 beeps.
Your card is coded.
An orange indicator and 2 beeps emitted 15 seconds after the last registration
indicate the end of the registration mode.
Note: to quit the registration mode, you can also place the enrolment card
against the antenna.
Removing all access rights in the unit
1. Hold the reset card against the antenna.
2. The antenna flashes in GREEN and sounds 3 beeps to indicate the end of the
operation. All rights are then deleted.
Following this operation, no card will operate. A red light will then appear to indicate
access denial.
7