Wall Installation; Operation Of The Air Conditioner - tomado TMA9001W Mode D'emploi

WALL INSTALLATION

• Drill a 125 diameter hole in the wall, for the wall outlet with valve.
• Fasten the wall outlet with the provided screws and plugs.
• Attach the end of the discharge hose with the wall outlet connector to the wall outlet.
• Close the valve of the wall outlet when the appliance is not being used.
plugs
wall outlet
with valve
max. 120 cm.
min. 30 cm.

OPERATION OF THE AIR CONDITIONER

In addition to cooling, the air conditioner has two other functions, i.e. air circulation and dehumidification.
The air conditioner can be operated via the control panel on the appliance and with the provided remote control.
• Choose a location near a socket.
• Install the discharge hose in accordance with the figures and make sure the window is closed as much as possible.
• Insert the plug in an earthed socket.
• Prior to each use, manually open the fins of the air outlet.
• Press the on/off key to switch on the air conditioner.
• The temperature range of the air conditioner is: 17 to 35°C.
• Check that the discharge hose is mounted correctly.
• Do not share the socket with any other appliances.
COOLING
• Press the mode key [mode] until the indicator light for cooling lights up on the display.
• Press the [ temp  and temp  ] keys to set the required room temperature (between 17°C and 30°C).
• Press the [ fan speed ] key on the remote control to adjust the wind speed.
The best temperature in the summer will be between 21 and 24°C. The speed of the fan can be sensed better on the air
circulation position than on the cooling position.
EN - 27