Aqua Medic Mistral 50 ECO Mode D'emploi page 4

Aquarium membrane air pump with a maximum capacity of 78 l/h.
In purchasing this unit, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts.
1. Features
The Mistral membrane air pumps are designed for universal use. Due to the vibration reducing rubber feet it is
exceptionally quiet in operation.
Important note:
The pump must only be operated at the correct voltage (see type label).
2. Technical Data
Type:
Power requirements:
Power uptake:
Maximum capacity:
Pressure:
Connection pressure side:
3. Connections
The pump is connected to the equipment it supplies with aquarium air tube (6 mm). If ozone is to be used,
ozone resistant tubing (e. g. silicone) must be used.
4. Installation
The pump should be positioned in a dry place. Care should be taken to ensure that water cannot enter the pump
when, for instance, it is switched off for aquarium maintenance or during a power failure.
There are two methods of installation:
- above the water level – see Fig. A below
- below the water level. In this case, a reliable non-return valve must be fitted in the air pipe – see Fig. B
below.
Ensure that the power plug can easily be reached at any time.
1
3
Fig. A
1. Mistral 50 ECO
4
Operation Manual ENG
Mistral 50 ECO
220 V – 240 V / 50 Hz
1.8 watts
78 litres/hour
0.012 Mpa
air tube 4/6 mm
2
2. Aquarium 3. Air stone
2
4
3
1
Fig. B
4. Non-return valve