Futurelight LB-12 REB LED-BAR Mode D'emploi page 29

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MODE
• Press [ENTER] to enter the main menu "MODE".
• Press [ENTER] and select "ADDR", "CHAL" or "SLAV" by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select "ADDR" by pressing [UP] or [DN].
• Press [ENTER], adjust the DMX address by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [ESC] in order to return to main menu.
Adjust DMX channel mode
With this function, you can adjust the DMX channel mode.
• Select "CHAL" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select "C006", "C012" or "C015".
• Press [ENTER] to confirm.
• Press [ESC] in order to return to the main menu.
Slave setting
With this function, you can define the device as slave. When this function is activated, the unit will turn
to address 1 and 15 channel mode. This setting is not available if this function is OFF.
• Select "SLAV" by pressing [UP] or [DN].
• Press [ENTER], the display shows "ON" or "OFF".
• Press [UP] to select "ON" if you wish to enable this function or [DN] to select "OFF" if you don't.
• Press [ENTER] to confirm.
• Press [ESC] in order to return to the main menu.
PLAY
• Press [UP] or [DN] to enter the main menu "PLAY"
• Press [ENTER] and select the desired sub menu by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
Automatic Program Run
The selection "ALON" means Stand Alone-mode and "MAST " that the device is defined as master.
• Select "CNTL"pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Select "MAST" or "ALON" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [ESC] in order to return to the main menu.
Blackout
With this function, you can select Blackout.
• Select "BLAC" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [ESC] in order to return to the main menu.
Static colors / dimming LEDs
SRED
With this function, you can adjust the static color red between values 0 and 255 (0 = black, 255 =
100 % red).
SGRE
With this function, you can adjust the static color green between values 0 and 255 (0 = black, 255 =
100 % green).
SBLU
With this function, you can adjust the static color blue between values 0 and 255 (0 = black, 255 =
100 % blue).
29/63
00032426.DOC, Version 1.0

Publicité

Table des Matières
loading

Table des Matières