Rinsing Cycle; Legal Information; Display Indications - Gaggia Syncrony Compact Digital Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
ENGLISH
• press "∧" or "∨" to select the function:
ON/OFF TIME
and enable it by pressing "MENU/OK".
• Select the hour when you want the machine
to go on by pressing "∧" or "∨" and memorise
by pressing "MENU/OK".
ON/OFF TIME
ON
7:30
then press "∧" or "∨" to set the minutes and
memorise the setting by pressing "MENU/OK".
• Select the hour when you want the machine
to go off by pressing "∧" or "∨" and memorise
by pressing "MENU/OK";
ON/OFF TIME
OFF
9:30
then press "∧" or "∨" to set the minutes and
memorise the setting by pressing "MENU/OK".
Warning: if the on/off time settings
coincide, the machine will ignore
both. After the times have been set, the
clock must be activated in order for the
function to work.
Activating the automatic on/off
function
Note: activating this function makes
sense only if you have already set the
on/off times.
• Press "∧" or "∨" to select the function:
CLOCK
enable it by pressing "MENU/OK".
• The display will show:
CLOCK
OFF
In this case pressing "MENU/OK" will
deactivate the function.
Choose to activate the function by pressing
"∧" or "∨" and when
CLOCK
ON
appears, memorise the setting by pressing
"MENU/OK".
When you exit the programming mode, the
machine will check the set parameters. If the
current time falls within the set deactivation time,
the display will indicate:
ENERGY SAVING
Note: during the set deactivation
period, the machine can be restarted
at any time by pressing "MENU/OK". Later,
to deactivate the machine again, go into the
programming mode by pressing "MENU/
OK" and exit immediately by pressing "ESC".

RINSING CYCLE

With this function, all the parts involved in the coffee
dispensing process undergo a washing cycle with water.
During the wash cycle it is
recommended that a person be on
hand to supervise the operation.
• To start the wash cycle, press "∧" or "∨" to
select the function:
RINSING CYCLE
to enable the function press "MENU/OK". Press
"MENU/OK" again to start the wash cycle.
• When the wash cycle is completed, the
following message will appear.
FILL WATERTANK
At this point fill the water tank. The machine
will automatically switch to the normal
operating mode and the following message
will appear on the display:
SELECT PRODUCT
READY FOR USE
• 38 •

13 LEGAL INFORMATION

• This instruction book contains the
information you need in order to use and
upkeep your appliance correctly.
• The information should be viewed as a
guideline for using and upkeeping your
coffee maker in safety. The information is
not exhaustive. For additional information
or for information on topics not covered or
inadequately covered in this instruction
book, please contact an authorized service
centre or the manufacturer directly.
• In addition, it should be noted that these
instructions do not form part of a previous
or existing agreement, legal contract or
similar and that the information is not
changed by any other document.
• All the manufacturer's obligations and
liabilities are based on the contract of sale,
which also specifies all the warranty terms
and conditions.
• The warranty terms and conditions are
neither limited nor extended on the basis of
this instruction book.
• This instruction book contains information
protected by copyright.
• This instruction book may not be
photocopied or translated into other
languages without the explicit written
consent of the manufacturer.
14 SCRAPPING
• Make unusable any appliances no longer in use.
• Detach the plug from the wall outlet and cut
the electric cord.
• Deliver scrapped appliances to a suitable
waste disposal facility.

15 DISPLAY INDICATIONS

The display guides users and helps them to use the
machine properly.
Below is a description of alarm messages that disable
the coffee dispenser and an explanation of what
the user must do in order to use the machine properly.
ENERGY SAVING
• Press "MENU/OK" (28).
ENGLISH
DESCALING
• Descale the machine (see Chap.11)
FILL WATERTANK
• Fill the water tank (9) with fresh drinking water
(Fig.03).
COFFEE BEANS EMPTY
• Fill the coffee bean container with coffee beans
and restart the coffee dispensing cycle.
DREGDRAWER FULL
• Open the front cover (15), take out the coffee
grounds drawer (10) and empty the grounds
into a suitable container.
Important note: the coffee grounds drawer
may be emptied only when the machine is
on. The drawer must be taken out for at least
5 seconds. If you empty out the drawer with
the machine off, the coffee dispensing function
will be disabled when you switch it back on.
BREWUNIT MISSING
• Fit the coffee dispenser unit (17) properly in
place.
DREGDRAWER MISSING
• Fit the drip tray (12) and coffee grounds drawer
(10) properly in place.
CLOSE DOOR
• Close the front cover (15).
GRINDER BLOCKED
BREWUNIT BLOCKED
• Contact an authorized service centre.
• 39 •

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sup025ydr

Table des Matières