JB Systems Light STROBE MASTER BF-04A Mode D'emploi page 4

ENGLISH
INSTALLATION
The Strobe Master is connected to the synchronization input jacks on the strobes
using ¼"jack/jack cables (for example our cables 2-0425 and 2-0426).
The four strobes are each individually connected to the strobe master. If you want to
connect more than 4 strobes, you can use the output jacks on the strobes to link to the
input of the next strobe etc.
MAINTENANCE
The unit should be cleaned regularly using a wet cloth. We recommend internal
cleaning to be carried out by qualified personnel.
SPECIFICATIONS
Power Supply:
Signal outputs:
Compatible strobes:
Size:
Weight:
Fuse:
AND LOOK FOR OTHER PRODUCTS FROM
JB SYSTEMS
AC 240 V, 50Hz
0 – 10V
FL1800 – STR300 – FL045B – Zap Strobes.
48.3 x 85 x 4.4cm (19" / 1U)
1.8kg
250V ~ 1A slow (ø 5x20mm)
SURF TO:
WWW.BEGLEC.COM
JB SYSTEMS
4/16
OPERATION MANUAL
STROBE MASTER BF-04A