Publicité
7.8 Phases of the moon / tides
The base station shows you the current phase of the moon (3) by
means of the following symbols:
Display
Tides:
H = High tide
M = Mid-tide
L = Low tide
222219man_bg_cs_de_el_en_es_fi_fr_hu_it_nl_pl_pt_ro_ru_sk_sv.indd 9
222219man_bg_cs_de_el_en_es_fi_fr_hu_it_nl_pl_pt_ro_ru_sk_sv.indd 9
7.9 Min/Max temperature / ambient humidity alarm
Setting Min/Max values
• Press the ALERT button (E) for around 3 seconds until the
Phase of the moon
• The temperature display flashes for around 20 seconds. Pressing
New moon
• By pressing the ALERT button (E) again, you can select the
• Repeat the steps for the ambient humidity.
• When a maximum or minimum value is reached, the display
Half moon waxing
• To end the alarm, press the ALERT button (E) once.
Deactivating / activating the alarm
• Press the Alert button once briefly and the "HI" maximum value
Half moon
7.10 Barometer
Display of the absolute air pressure for precise monitoring of
weather changes.
Full moon waxing
The built-in barometer collects the changes in air pressure over the
last 24 hours and displays these in graphic form. You can choose
between hPa and Hg as the unit, see Point 7.4
Full moon
7.11 Temperature indicator
• Briefly press the Up button (B) to switch between Celsius and
Full moon waning
7.12 Frost alarm
• If the outdoor temperature is between -1°C and 3°C, the frost
Half moon
7.13 Alarm clock
Setting the alarm
• Press the alarm clock button (F) for around 3 seconds and the
Half moon waning
• Press the Up button (B) or Down button (C) to select the hour
• The minute display starts to flash. Repeat the procedure for the
• Confirm the selection by pressing the Alarm clock button (F).
Deactivating / activating the alarm
Briefly press the Alarm clock button (A) to activate the alarm.
An active alarm clock is shown in the display with the alarm clock
outdoor temperature starts to flash.
the arrow keys (B) or (C) allows you to first set the maximum
value (HI) and then the minimum value (LO).
respective value.
flashes and a 5-second alarm sounds every minute.
starts to flash. Pressing the arrow key allows you to activate or
deactivate the alarm. An activated alarm is indicated by a small
alarm symbol. Repeat the steps for the minimum value "LO".
Note
High air pressure is always associated with fin weather, while
low air pressure indicates wet weather.
Fahrenheit.
symbol (8) flashes on the display.
hour of the alarm time starts to flash.
of the alarm time and confirm the selection by pressing the
Alarm clock button (F).
minutes of the alarm time.
9
18.11.24 15:0
18.11.24 15:0
Publicité
