Maruyama B42L Manuel Du Propriétaire/Utilisateur page 12

CAUTION
POTENTIAL HAZARD
• The cutoff blade is sharp.
WHAT CAN HAPPEN
• Contact with cutoff blade could cause
serious cuts or personal injury.
HOW TO AVOID THE HAZARD
• Keep hands, feet and clothing away from
cutoff blade.
Debris Shield
Attach the debris shield to the gearcase with the two
M6 x 30 screws as shown on Fig. 1.
Shield Extension
(Install the string cutoff blade and shield extension to
the debris shield.)
1. Insert the square nut into shield extension as
shown on Fig. 2.
Square Nut
2. Attach the string cutoff blade to shield extension
using M5 x 20 screw, locking with square nut (on
Fig.2) as shown on Fig. 3 .
String Cut off Blade
M5 x 20 Screw
M6 x 30 Screw (2)
Gearcase
Debris Shield
Fig.1
Shield Extension
Fig.2
Fig.3
3. Enter the guide in the slot of debris shield on Fig.4.
Make sure place the three hooks into the position
on the shield as shown on Fig.5.
Debris Shield
Shield Extension
Hook
Fig.4
[B42A]
POTENTIAL HAZARD
• Foreign objects can be thrown by the
Trimmer/ Brushcutter.
WHAT CAN HAPPEN
• Contact with thrown objects can cause
personal injury.
HOW TO AVOID THE HAZARD
• Never operate the Trimmer/ Brushcutter
without the debris shield in place.
Debris Shield
Attach the debris shield to the gearcase with the four
M5 x 10 screws.
Gearcase
— US-11 —
Guide
Hook
Fig.5
WARNING
Debris Shield
M5 x 10 Screw (4)