Other Functions; Display Light; Mains Operation; Reset - ADE WS 1703 Mode D'emploi

Other functions

Display light

Battery operation
− Press the SNOOZE/LIGHT button to switch on
the display light of the base station for approx.
15 seconds.

Mains operation

If you operate the base station using the mains adaptor
over the mains supply, the display is permanently lit.
− Repeatedly press the SNOOZE/LIGHT button in order
to choose the different brightness levels: Full light >
low light > off.

Reset

If obviously false values are being shown on the display of
the base station, you should reset the base station to the
delivery state.
1. Insert a thin object, e.g. an unfolded paperclip, into the
RESET opening on the rear side of the base station.
2. Press with a little force against the resistance.
After a short time, all indicators on the display will
fade in for a brief moment. Furthermore, the display is
briefly lit up and a beep sounds.
70
Weather Station with Wireless Outdoor Sensor WS 1703